Pole-mounted Switch

To share:

ZW20-12 Outdoor Pole-mounted Vacuum Circuit Breaker

  • ZW20-12 Outdoor Pole-mounted Vacuum Circuit Breaker-1
  • Description
  • Specification
  • Features
  • Size
  • Catalogue

ZW20-12 Outdoor Pole-mounted Vacuum Circuit Break is an outdoor HV switch device with rated voltage of 12kV, three-phase AC frequency of 50Hz, opening and closing load current, over-current and short circuit current.

It is applied in substation, industrial and mining establishment and urban and rural grid as a protection and control device, especially in the places of frequent operation and in the distribution automation grid in the urban.

This product meets the standards of GB1984-2003 and DL402-2007.

No.

Description

Unit

Parameter

1

Rated voltage

kV

12

2

Rated current

A

630

3

Rated frequency

Hz

50

4

Rated short-circuit breaking current

kA

20

25

5

Rated short-time withstand current 4s

kA

20

25

6

Rated short-circuit making current(peak)

kA

50

63

7

Rated peak withstand current

kA

50

63

8

Rated insulation level

Power frequency withstand voltage(1 min)

kV

42

Impulse withstand voltage(peak)

kV

75

9

 Mechanical life

times

10000

10

Breaking times of rated short-circuit breaking current

times

30

11

Rated SF6 gas pressure

MPa

0.01


1. Best choice for the reconstruction of urban and rural grid:it can work with controller to achieve the function of remote control, metering, signaling and regulation.

2. Easy and convenient to operate: energy-stored type, it can open and close manually and electrically. It has the function of manual energy storage, opening and closing, available for operation at a short distance.

3. Excellent breaking capacity:  short-circuit breaking current 25kA, 30 times. 

4. Small operating power and high reliability: the operating power of new design of small electric spring actuator reduces to minimum, about 30W.

5. Flexible installation: by lifting or supporting with brackets.

6. Reliable sealing performance: the SF6 gas pressure gauge reaches zero and it adopts the technology of mature sealing structure, not easy to leak.

7. Unique way of cable in and out: it uses silicone rubber tube, leaving enough insulation distance between terminals, good outer insulating performance.

8. Safe operation: there is an explosion proof device on the top of the frame. No leakage of high temperature gas or spatter even if there is an internal fault.